User instructions

1. Switch on power switch from large grey box unit located by the outside wall.
   
2. On option screen choose 1. Network with Pentium (press return)
   
3. The words "press any key to continue" should appear (press the any key)
   
4. Enter username A130GFM
   
5. Enter password A130GFM (Place Caps Lock on)
   
6. User ID is A130RS
   
7. Passcode is A130RS
   
8. When the main screen appears press STOP (reset)
   
9. Press [REF] button and set override speed to 100% and press START.
   
10. Press [MDI] and then F2 set blade to edge 1 (new) edge 2 (old)
    
11. Press F6 and set offset to 0.
    
12. Set Y-axis. This is the distance to edge of cloth from the edge of the machine from wall side.
    
13. Set correction to 0.
    
14. Press F8 and scroll down to vac bed and set on required vac beds.
    
15. Type in M33 and M31 and the press enter. This will make the machine cut off edge of cloth and return to zero.
    
16. Press F3 and then F6 and then enter program number. Highlight and press F1.
    
17. Press [AUTO} and then start.

Return to GFM index